In electric furnaces, electronic drying units, and heat treatment equipment, insulation materials are expected not only to retain heat, but also to ensure operational safety and a clean environment. Traditional ceramic fiber boards, though effective in thermal insulation, often release dust, generate smoke from organic binders, or deform under thermal shock—leading to contamination of sensitive […]

In petrochemical facilities, a wide range of equipment—such as heat exchangers, storage tanks, distillation towers, and reactors—operates under high temperatures, high humidity, and corrosive conditions. If insulation materials have poor compressive strength, high thermal conductivity, or high water absorption, they can cause substantial heat loss and add unnecessary load to the structure, compromising both energy […]

In industrial heating systems, the hot-face lining plays a critical role, directly exposed to flames, high-velocity heat flow, and frequent thermal cycling from start-stop operations. Furnace and oven manufacturers often struggle with two key challenges: traditional high-temperature boards are prone to cracking and delamination under repeated thermal shock, and installation tends to produce excessive airborne […]

In long-term operation of glass melting furnaces, the furnace roof is constantly exposed to high-temperature radiation, hot gas flow erosion, and structural thermal cycling. It is one of the most vulnerable areas for insulation degradation and heat loss. Traditional insulation structures, such as composite bricks and standard fiber products, often suffer from compression, fiber shedding, […]

In high‑temperature equipment such as boilers and incinerators, insulation liners must withstand extreme conditions: intense heat radiation, frequent thermal cycling, and aggressive combustion gases. While traditional ceramic fiber insulation offers effective thermal resistance, it often suffers from dusting, fiber degradation, moisture absorption, and health hazards—drawbacks increasingly unacceptable, especially in North American and European markets. CCEWOOL® […]

In thermal processing applications such as industrial furnaces and ovens, hot face lining materials play a vital role in insulation, energy efficiency, and structural stability. However, traditional ceramic fiber boards often suffer from powdering, delamination, high shrinkage, and strong irritation to the human body after prolonged high-temperature use—issues that have raised increasing concern, especially in […]