Ceramic fiber blankets are widely used for industrial furnace backup insulation, furnace door insulation, pipe insulation, and continuous insulation layers behind ceramic fiber modules. For custom fabrication, blanket rolls are typically cut to specified widths, lengths, or shapes according to engineering drawings, then processed into multilayer insulation pads, flexible seals, or custom-shaped insulation components. To achieve dimensional accuracy, clean-cut edges, and ease of installation, it is important to consider not only cutting tools but also ceramic fiber blanket specifications, fabrication drawings, and material quality before processing.
Before cutting, confirm the product series, classification temperature, recommended service temperature, thickness, density, and original roll dimensions. The finished component's length, width, profile, quantity, and dimensional tolerances should then be specified according to the engineering drawings. If compression fitting is required, the designed compression allowance and target installed thickness must be defined. For multilayer insulation, the dimensions of each layer, staggered joint positions, corner overlaps, and edge allowances should also be determined in advance. Proper preparation helps prevent dimensional mismatches between the cut material and the final installation space.
CCEWOOL® ceramic fiber blankets are manufactured using a needling process that produces flexible blankets with good structural integrity. They are available in different temperature grades, thicknesses, densities, and dimensions. PUREWOOL® RCF Blanket for Fabrication features extra-long spun fibers and a double-sided internal needling structure, making it suitable for precision cutting, slitting, and subsequent insulation component fabrication. When selecting materials, the temperature grade should be matched to the long-term interface temperature at the installation location, while original roll dimensions and cutting allowances should be confirmed against the fabrication drawings.
For straight cuts and small-batch fabrication, lay the ceramic fiber blanket flat on a clean, level work surface and allow it to relax naturally before measuring and marking. Use a steel ruler or straightedge as a guide, and cut steadily along the marked line with a sharp blade. Keep the blade as perpendicular to the blanket surface as possible to avoid pulling the fibers or repeatedly tearing the cut edges. For narrow strips, non-standard widths, or repeated lengths, use guided slitting equipment or dedicated fixtures. A trial cut should be performed first to verify dimensions and edge quality.
For custom-shaped insulation parts, multilayer assemblies, or components designed to fit equipment interfaces, define the profiles, openings, notches, and cutting orientation of each layer according to the drawings. Multilayer components require particular attention to layer dimensions and joint positions to prevent misalignment or uneven local thickness after assembly. Before batch fabrication, produce a first article and inspect its length, width, squareness, edge integrity, and thickness recovery. Once the first article meets the specified requirements, subsequent cutting can proceed using consistent positioning references.
Shot consists of unfiberized particles generated during the fiber-forming process. Shot content indicates the level of non-fibrous particles in the finished material and should not be confused with the chemical purity of the raw materials. CCEWOOL® standard RCF Blanket S 2300 has a specified shot content of ≤15%, while PUREWOOL® RCF Blanket for Fabrication has a lower specified shot content of ≤12%. These values apply to their respective product series and should not be interpreted as a universal specification for all CCEWOOL® ceramic fiber blankets.
Lower shot content can help reduce the coarse particles and loose shot released during cutting, contributing to cleaner cut edges and better edge integrity. This can be particularly beneficial when manufacturing insulation pads, flexible sealing components, and custom-shaped parts that require consistent cutting quality.
However, shot content is not equivalent to airborne dust concentration, and lower shot content does not mean dust-free fabrication. Cutting, slitting, and separating ceramic fiber insulation blankets can still generate airborne fibers and dust. Powered cutting equipment should be equipped with local exhaust ventilation or dust collection at the point of generation. Work surfaces should be cleaned using HEPA-filtered vacuum equipment or wet cleaning methods rather than compressed air. Operators should wear suitable gloves, safety goggles, protective clothing, and appropriate respiratory protection in accordance with the product Safety Data Sheet (SDS) and workplace risk assessment.
CCEWOOL® offers ceramic fiber blankets in different temperature grades, thicknesses, densities, and dimensions to support industrial insulation fabrication. For customers requiring precision cutting, slitting, or custom-shaped components, PUREWOOL® RCF Blanket for Fabrication combines extra-long spun fibers, double-sided internal needling, and controlled shot content to provide a suitable material foundation for downstream processing.
By selecting appropriate blanket specifications, confirming fabrication drawings, and applying consistent cutting and inspection procedures, customers can improve dimensional consistency, maintain cut-edge integrity, and prepare insulation components that better match their installation requirements.
Ceramic fiber blankets are widely used for industrial furnace backup insulation, furnace door insulation, pipe insulation, and continuous insulation layers behind ceramic fiber modules. For custom fabrication, blanket rolls are typically cut to specified widths, lengths, or shapes according to engineering drawings, then processed into multilayer insulation pads, flexible seals, or custom-shaped insulation components. To […]
Industry | 16 Nov, 2026
Destination: Pennsylvania, USAApplication: Replacement of Backup Insulation in Radiant-Section Walls and Roof of a Petrochemical Hydrogenation FurnaceProduct: Refractory Ceramic Fiber Blanket 2300°F | CCEWOOL®Sizes: 1″ × 24″ × 300″; 2″ × 24″ × 150″Density: 8 lb/ft³ (approx. 128 kg/m³)Packaging: Cartons + PalletsOrder Volume: 7 Pallets Recently, CCEWOOL® shipped seven pallets of ceramic fiber blankets to […]
Uncategorized | 12 Nov, 2026
When selecting a ceramic fiber board for industrial furnace backup insulation, the first consideration is the actual temperature experienced by the board. A classification temperature of 1260°C does not mean that the corresponding grade is suitable for continuous operation at 1260°C, just as the furnace chamber temperature cannot directly represent the interface temperature of a […]
Industry | 28 Oct, 2026